Stronghold Molding & Stair Tread Adhesive

Ensures that moldings stay put. High-strength, flexibly bonded, and resistant to high alkalinity. Comes in tube for use with a caulking gun.

Available Size: 28 oz

Icon representing Flash Time for Stronghold Molding & Stair Tread AdhesiveFlash Time
No Wait

Icon representing Working Time for Stronghold Molding & Stair Tread AdhesiveWorking Time
45 min

Icon representing Cure Time for Stronghold Molding & Stair Tread AdhesiveCure Time
12 hrs

Icon representing Light Traffic for Stronghold Molding & Stair Tread AdhesiveLight Traffic
6 hrs

Icon representing Heavy Traffic for Stronghold Molding & Stair Tread AdhesiveHeavy Traffic
6 hrs

Ideal For The Following Flooring Products:
Square Edge Stair Tread, Moldings

Photo of Stronghold Molding & Stair Tread Adhesive.



Light Commercial

Appropriate Tools

30oz Calking Gun

Required Testing

  • Porous Substrate ASTM F3191:
  • Non-Porous Substrate ASTM F3191:
  • RH Tolerance ASTM F2170:
  • MVER ASTM F1869:

Approved Substrates

  • Apa Underlayment Grade Plywood And Osb
  • Association Grade Particleboard
  • Cement Backer Board
  • Cementitious And Anhydrite Screeds
  • Concrete And Radiant Heated Subfloors That Do Not Exceed 85°F 30°C
  • Existing Well Bonded Non Cushion Backed Vinyl Tile And Sheet Flooring
  • Fully Secured Cork Underlayments
  • Gypsum And Lightweight Concrete Primed
  • Terrazzo Properly Prepared With All Waxes And Surface Finishes Removed
  • Well Bonded Residue From Cutback Adhesives